Leather Apron Welder Carpenter 60X90, Heat Resistant Multi Pockets

Leather welder's apron with 60 by 90 pockets and adjustable clip closure

This apron is made from reinforced leather, which ensures that you are well protected against heat and sparks. It is also very comfortable and light to wear which you will really notice after wearing for long periods. The waist strap is elastic and adjustable, making it much more comfortable than the straps on many other welding aprons.

There is always the feeling that it is held firmly in place, which is very important. This welding apron is as quick and easy to take off as it is to put on. Whilst this apron is ideal for welding, it is also suitable for a wide range of other uses, both in and out of the workshop.

Reinforced leather apron for welder, tool pockets, mis. 60X90. Adjustable closure with clip.



• Protective apron with bib for welders
• Size 60 x 90cm
• Cowhide leather
• With pockets
• Adjustable closure with leather clip
• Stitching in aramid thread for better resistance of the seams
• Natural color

Standard:

Class A1 - Limited flame spread (protection level A1: test method > horizontal flashover)
Class 1 garment

Use :

• Recommended for manual welding techniques with light spatter and droplet formation, e.g. gas welding, TIG welding, MIG welding, micro plasma welding, brazing, spot welding, MMA welding, rutile coated electrode
• Recommended for manual welding techniques with large metal spatter, e.g. MMA welding (basic coated electrode or cellulose coated electrode), MAG welding (with CO2 or gas mixture), MIG welding (with high current), arc welding self propagating cored, plasma fusion cutting, calibration, flame cutting, thermal spraying

This welding apron is designed to protect against accidental and short-term electrical contact.

Precautions for use:

• Read the instructions carefully before use
• Use the appropriate additional personal protective equipment to provide complete protection (trousers, welding mask, goggles, gloves…)
• Attention: for application reasons, it is not possible to provide protection against direct contact with all live parts of arc welding systems
• Additional partial protection may be required, e.g. for welding above head height.